分享Android 蓝牙4.0(ble)开发的解决方案

发布于 2016-04-22 00:26:30 | 282 次阅读 | 评论: 0 | 来源: 网友投递

Android移动端操作系统

Android是一种基于Linux的自由及开放源代码的操作系统，主要使用于移动设备，如智能手机和平板电脑，由Google公司和开放手机联盟领导及开发。尚未有统一中文名称，中国大陆地区较多人使用“安卓”或“安致”。

这篇文章主要为大家分享了Android 蓝牙4.0(ble)开发的解决方案，感兴趣的小伙伴们可以参考一下

最近，随着智能穿戴式设备、智能医疗以及智能家居的普及，蓝牙开发在移动开中显得非常的重要。由于公司需要，研究了一下，蓝牙4.0在Android中的应用。

以下是我的一些总结。

1.先介绍一下关于蓝牙4.0中的一些名词吧：
(1)、GATT(Gneric Attibute Profile)

通过ble连接，读写属性类小数据Profile通用的规范。现在所有的ble应用Profile 都是基于GATT
(2)、ATT(Attribute Protocal)
GATT是基于ATT Potocal的ATT针对BLE设备专门做的具体就是传输过程中使用尽量少的数据，每个属性都有个唯一的UUID，属性chartcteristics and Service的形式传输。

(3)、Service是Characteristic的集合。
(4)、Characteristic 特征类型。

比如，有个蓝牙ble的血压计。他可能包括多个Servvice，每个Service有包括多个Characteristic

注意：蓝牙ble只能支持Android 4.3以上的系统 SDK>=18

2.以下是开发的步骤：
2.1首先获取BluetoothManager

BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);

2.2获取BluetoothAdapter

BluetoothAdapter mBluetoothAdapter = bluetoothManager.getAdapter();

2.3创建BluetoothAdapter.LeScanCallback


private BluetoothAdapter.LeScanCallback mLeScanCallback = new BluetoothAdapter.LeScanCallback() { 
 
  @Override 
  public void onLeScan(final BluetoothDevice device, int rssi, final byte[] scanRecord) { 
 
   runOnUiThread(new Runnable() { 
    @Override 
    public void run() { 
     try { 
      String struuid = NumberUtils.bytes2HexString(NumberUtils.reverseBytes(scanRecord)).replace("-", "").toLowerCase(); 
      if (device!=null && struuid.contains(DEVICE_UUID_PREFIX.toLowerCase())) { 
       mBluetoothDevices.add(device); 
      } 
     } catch (Exception e) { 
      e.printStackTrace(); 
     } 
    } 
   }); 
  } 
 };

2.4.开始搜索设备。

mBluetoothAdapter.startLeScan(mLeScanCallback);

2.5.BluetoothDevice 描述了一个蓝牙设备提供了getAddress()设备Mac地址,getName()设备的名称。
2.6开始连接设备


 /** 
  * Connects to the GATT server hosted on the Bluetooth LE device. 
  * 
  * @param address 
  *   The device address of the destination device. 
  * 
  * @return Return true if the connection is initiated successfully. The 
  *   connection result is reported asynchronously through the 
  *   {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)} 
  *   callback. 
  */ 
 public boolean connect(final String address) { 
  if (mBluetoothAdapter == null || address == null) { 
   Log.w(TAG, "BluetoothAdapter not initialized or unspecified address."); 
   return false; 
  } 
 
  // Previously connected device. Try to reconnect. (先前连接的设备。 尝试重新连接) 
  if (mBluetoothDeviceAddress != null && address.equals(mBluetoothDeviceAddress) && mBluetoothGatt != null) { 
   Log.d(TAG, "Trying to use an existing mBluetoothGatt for connection."); 
   if (mBluetoothGatt.connect()) { 
    mConnectionState = STATE_CONNECTING; 
    return true; 
   } else { 
    return false; 
   } 
  } 
 
  final BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address); 
  if (device == null) { 
   Log.w(TAG, "Device not found. Unable to connect."); 
   return false; 
  } 
  // We want to directly connect to the device, so we are setting the 
  // autoConnect 
  // parameter to false. 
  mBluetoothGatt = device.connectGatt(this, false, mGattCallback); 
  Log.d(TAG, "Trying to create a new connection."); 
  mBluetoothDeviceAddress = address; 
  mConnectionState = STATE_CONNECTING; 
  return true; 
 }

2.7连接到设备之后获取设备的服务(Service)和服务对应的Characteristic。


// Demonstrates how to iterate through the supported GATT 
// Services/Characteristics. 
// In this sample, we populate the data structure that is bound to the 
// ExpandableListView 
// on the UI. 
private void displayGattServices(List<BluetoothGattService> gattServices) { 
 if (gattServices == null) 
  return; 
 String uuid = null; 
 ArrayList<HashMap<String, String>> gattServiceData = new ArrayList<>(); 
 ArrayList<ArrayList<HashMap<String, String>>> gattCharacteristicData = new ArrayList<>(); 
 
 mGattCharacteristics = new ArrayList<>(); 
 
 // Loops through available GATT Services. 
 for (BluetoothGattService gattService : gattServices) { 
  HashMap<String, String> currentServiceData = new HashMap<>(); 
  uuid = gattService.getUuid().toString(); 
  if (uuid.contains("ba11f08c-5f14-0b0d-1080")) {//服务的uuid 
   //System.out.println("this gattService UUID is:" + gattService.getUuid().toString()); 
   currentServiceData.put(LIST_NAME, "Service_OX100"); 
   currentServiceData.put(LIST_UUID, uuid); 
   gattServiceData.add(currentServiceData); 
   ArrayList<HashMap<String, String>> gattCharacteristicGroupData = new ArrayList<>(); 
   List<BluetoothGattCharacteristic> gattCharacteristics = gattService.getCharacteristics(); 
   ArrayList<BluetoothGattCharacteristic> charas = new ArrayList<>(); 
 
   // Loops through available Characteristics. 
   for (BluetoothGattCharacteristic gattCharacteristic : gattCharacteristics) { 
    charas.add(gattCharacteristic); 
    HashMap<String, String> currentCharaData = new HashMap<>(); 
    uuid = gattCharacteristic.getUuid().toString(); 
    if (uuid.toLowerCase().contains("cd01")) { 
     currentCharaData.put(LIST_NAME, "cd01"); 
    } else if (uuid.toLowerCase().contains("cd02")) { 
     currentCharaData.put(LIST_NAME, "cd02"); 
    } else if (uuid.toLowerCase().contains("cd03")) { 
     currentCharaData.put(LIST_NAME, "cd03"); 
    } else if (uuid.toLowerCase().contains("cd04")) { 
     currentCharaData.put(LIST_NAME, "cd04"); 
    } else { 
     currentCharaData.put(LIST_NAME, "write"); 
    } 
 
    currentCharaData.put(LIST_UUID, uuid); 
    gattCharacteristicGroupData.add(currentCharaData); 
   } 
 
   mGattCharacteristics.add(charas); 
 
   gattCharacteristicData.add(gattCharacteristicGroupData); 
 
   mCharacteristicCD01 = gattService.getCharacteristic(UUID.fromString("0000cd01-0000-1000-8000-00805f9b34fb")); 
   mCharacteristicCD02 = gattService.getCharacteristic(UUID.fromString("0000cd02-0000-1000-8000-00805f9b34fb")); 
   mCharacteristicCD03 = gattService.getCharacteristic(UUID.fromString("0000cd03-0000-1000-8000-00805f9b34fb")); 
   mCharacteristicCD04 = gattService.getCharacteristic(UUID.fromString("0000cd04-0000-1000-8000-00805f9b34fb")); 
   mCharacteristicWrite = gattService.getCharacteristic(UUID.fromString("0000cd20-0000-1000-8000-00805f9b34fb")); 
 
   //System.out.println("=======================Set Notification=========================="); 
   // 开始顺序监听，第一个：CD01 
   mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD01, true); 
   mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD02, true); 
   mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD03, true); 
   mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD04, true); 
  } 
 } 
}

2.8获取到特征之后，找到服务中可以向下位机写指令的特征，向该特征写入指令。


public void wirteCharacteristic(BluetoothGattCharacteristic characteristic) { 
 
  if (mBluetoothAdapter == null || mBluetoothGatt == null) { 
   Log.w(TAG, "BluetoothAdapter not initialized"); 
   return; 
  } 
 
  mBluetoothGatt.writeCharacteristic(characteristic); 
 
 }

2.9写入成功之后，开始读取设备返回来的数据。


private final BluetoothGattCallback mGattCallback = new BluetoothGattCallback() { 
  @Override 
  public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) { 
   String intentAction; 
   //System.out.println("=======status:" + status); 
   if (newState == BluetoothProfile.STATE_CONNECTED) { 
    intentAction = ACTION_GATT_CONNECTED; 
    mConnectionState = STATE_CONNECTED; 
    broadcastUpdate(intentAction); 
    Log.i(TAG, "Connected to GATT server."); 
    // Attempts to discover services after successful connection. 
    Log.i(TAG, "Attempting to start service discovery:" + mBluetoothGatt.discoverServices()); 
 
   } else if (newState == BluetoothProfile.STATE_DISCONNECTED) { 
    intentAction = ACTION_GATT_DISCONNECTED; 
    mConnectionState = STATE_DISCONNECTED; 
    Log.i(TAG, "Disconnected from GATT server."); 
    broadcastUpdate(intentAction); 
   } 
  } 
 
  @Override 
  public void onServicesDiscovered(BluetoothGatt gatt, int status) { 
   if (status == BluetoothGatt.GATT_SUCCESS) { 
    broadcastUpdate(ACTION_GATT_SERVICES_DISCOVERED); 
   } else { 
    Log.w(TAG, "onServicesDiscovered received: " + status); 
   } 
  } 
  //从特征中读取数据 
  @Override 
  public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
   //System.out.println("onCharacteristicRead"); 
   if (status == BluetoothGatt.GATT_SUCCESS) { 
    broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
   } 
  } 
  //向特征中写入数据 
  @Override 
  public void onCharacteristicWrite(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
   //System.out.println("--------write success----- status:" + status); 
  } 
 
  /* 
   * when connected successfully will callback this method this method can 
   * dealwith send password or data analyze 
   
   *当连接成功将回调该方法 
   */ 
  @Override 
  public void onCharacteristicChanged(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic) { 
   broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
   if (characteristic.getValue() != null) { 
 
    //System.out.println(characteristic.getStringValue(0)); 
   } 
   //System.out.println("--------onCharacteristicChanged-----"); 
  } 
 
  @Override 
  public void onDescriptorWrite(BluetoothGatt gatt, BluetoothGattDescriptor descriptor, int status) { 
 
   //System.out.println("onDescriptorWriteonDescriptorWrite = " + status + ", descriptor =" + descriptor.getUuid().toString()); 
 
   UUID uuid = descriptor.getCharacteristic().getUuid(); 
   if (uuid.equals(UUID.fromString("0000cd01-0000-1000-8000-00805f9b34fb"))) { 
    broadcastUpdate(ACTION_CD01NOTIDIED); 
   } else if (uuid.equals(UUID.fromString("0000cd02-0000-1000-8000-00805f9b34fb"))) { 
    broadcastUpdate(ACTION_CD02NOTIDIED); 
   } else if (uuid.equals(UUID.fromString("0000cd03-0000-1000-8000-00805f9b34fb"))) { 
    broadcastUpdate(ACTION_CD03NOTIDIED); 
   } else if (uuid.equals(UUID.fromString("0000cd04-0000-1000-8000-00805f9b34fb"))) { 
    broadcastUpdate(ACTION_CD04NOTIDIED); 
   } 
  } 
 
  @Override 
  public void onReadRemoteRssi(BluetoothGatt gatt, int rssi, int status) { 
   //System.out.println("rssi = " + rssi); 
  } 
 }; 
  
 ---------------------------------------------- 
  //从特征中读取数据 
  @Override 
  public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
   //System.out.println("onCharacteristicRead"); 
   if (status == BluetoothGatt.GATT_SUCCESS) { 
    broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
   } 
  }

2.10、断开连接


/** 
  * Disconnects an existing connection or cancel a pending connection. The 
  * disconnection result is reported asynchronously through the 
  * {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)} 
  * callback. 
  */ 
 public void disconnect() { 
  if (mBluetoothAdapter == null || mBluetoothGatt == null) { 
   Log.w(TAG, "BluetoothAdapter not initialized"); 
   return; 
  } 
  mBluetoothGatt.disconnect(); 
 }

2.11、数据的转换方法


// byte转十六进制字符串 
 public static String bytes2HexString(byte[] bytes) { 
  String ret = ""; 
  for (byte aByte : bytes) { 
   String hex = Integer.toHexString(aByte & 0xFF); 
   if (hex.length() == 1) { 
    hex = '0' + hex; 
   } 
   ret += hex.toUpperCase(Locale.CHINA); 
  } 
  return ret; 
 }


/** 
  * 将16进制的字符串转换为字节数组 
  * 
  * @param message 
  * @return 字节数组 
  */ 
 public static byte[] getHexBytes(String message) { 
  int len = message.length() / 2; 
  char[] chars = message.toCharArray(); 
  String[] hexStr = new String[len]; 
  byte[] bytes = new byte[len]; 
  for (int i = 0, j = 0; j < len; i += 2, j++) { 
   hexStr[j] = "" + chars[i] + chars[i + 1]; 
   bytes[j] = (byte) Integer.parseInt(hexStr[j], 16); 
  } 
  return bytes; 
 }

大概整体就是如上的步骤，但是也是要具体根据厂家的协议来实现通信的过程。

就拿一个我们项目中的demo说一下。
一个蓝牙ble的血压计。上位机---手机下位机 -- 血压计
1.血压计与手机连接蓝牙之后。
2.上位机主动向下位机发送一个身份验证指令，下位机收到指令后开始给上位做应答，
3.应答成功，下位机会将测量的血压数据传送到上位机。
4.最后断开连接。

希望本文对大家学习Android蓝牙技术有所帮助。

分享Android 蓝牙4.0(ble)开发的解决方案

Android移动端操作系统

后端技术

前端技术

数据库

热门框架

常用IDE

其他