发布于 2016-04-01 12:44:41 | 83 次阅读 | 评论: 0 | 来源: 网友投递

这里有新鲜出炉的Mysql教程,程序狗速度看过来!

Mysql关系型数据库管理系统

MySQL是一个开放源码的小型关联式数据库管理系统,开发者为瑞典MySQL AB公司。MySQL被广泛地应用在Internet上的中小型网站中。由于其体积小、速度快、总体拥有成本低,尤其是开放源码这一特点,许多中小型网站为了降低网站总体拥有成本而选择了MySQL作为网站数据库。


这篇文章主要介绍了浅谈MySQL中的子查询优化技巧,子查询的优化是MySQL诸多优化方法中的基本,需要的朋友可以参考下

mysql的子查询的优化一直不是很友好,一直有受业界批评比较多,也是我在sql优化中遇到过最多的问题之一,你可以点击这里 ,这里来获得一些信息,mysql在处理子查询的时候,会将子查询改写,通常情况下,我们希望由内到外,也就是先完成子查询的结果,然后在用子查询来驱动外查询的表,完成查询,但是恰恰相反,子查询不会先被执行;今天希望通过介绍一些实际的案例来加深对mysql子查询的理解:

案例:用户反馈数据库响应较慢,许多业务动更新被卡住;登录到数据库中观察,发现长时间执行的sql;


| 10437 | usr0321t9m9 | 10.242.232.50:51201 | oms | Execute | 1179 | Sending

Sql为:


select tradedto0_.* from a1 tradedto0_ where tradedto0_.tradestatus='1'
and (tradedto0_.tradeoid in (select orderdto1_.tradeoid from a2 orderdto1_ where
orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')) and tradedto0_.undefine4='1'
and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;

2.其他表的更新被阻塞:


update a1 set tradesign='DAB67634-795C-4EAC-B4A0-78F0D531D62F',
markColor=' #CD5555', memotime='2012-09- 22', markPerson='??' where tradeoid in ('gy2012092204495100032') ;

为了尽快恢复应用,将其长时间执行的sql kill掉后,应用恢复正常;
3.分析执行计划:


db@3306 :explain select tradedto0_.* from a1 tradedto0_ where tradedto0_.tradestatus='1' and (tradedto0_.tradeoid in (select orderdto1_.tradeoid
from a2 orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')) and tradedto0_.undefine4='1' and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;
+----+--------------------+------------+------+---------------+------+---------+------+-------+-----
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+--------------------+------------+------+---------------+------+---------+------+-------+-----
| 1 | PRIMARY | tradedto0_ | ALL | NULL | NULL | NULL | NULL | 27454 | Using where; Using filesort |
| 2 | DEPENDENT SUBQUERY | orderdto1_ | ALL | NULL | NULL | NULL | NULL | 40998 | Using where |
+----+--------------------+------------+------+---------------+------+---------+------+-------+-----

从执行计划上,我们开始一步一步地进行优化:
首先,我们看看执行计划的第二行,也就是子查询的那部分,orderdto1_进行了全表的扫描,我们看看能不能添加适当的索引:
A.使用覆盖索引:


db@3306:alter table a2 add index ind_a2(proname,procode,tradeoid);
ERROR 1071 (42000): Specified key was too long; max key length is 1000 bytes

添加组合索引超过了最大key length限制:
B.查看该表的字段定义:


 db@3306 :DESC a2 ;
+---------------------+---------------+------+-----+---------+-------+
| FIELD        | TYPE     | NULL | KEY | DEFAULT | Extra |
+---------------------+---------------+------+-----+---------+-------+
| OID         | VARCHAR(50)  | NO  | PRI | NULL  |    |
| TRADEOID      | VARCHAR(50)  | YES |   | NULL  |    |
| PROCODE       | VARCHAR(50)  | YES |   | NULL  |    |
| PRONAME       | VARCHAR(1000) | YES |   | NULL  |    |
| SPCTNCODE      | VARCHAR(200) | YES |   | NULL  |    |

C.查看表字段的平均长度:


db@3306 :SELECT MAX(LENGTH(PRONAME)),avg(LENGTH(PRONAME)) FROM a2;
+----------------------+----------------------+
| MAX(LENGTH(PRONAME)) | avg(LENGTH(PRONAME)) |
+----------------------+----------------------+
|  95       |    24.5588 |

D.缩小字段长度


ALTER TABLE MODIFY COLUMN PRONAME VARCHAR(156);

再进行执行计划分析:


db@3306 :explain select tradedto0_.* from a1 tradedto0_ where tradedto0_.tradestatus='1' and (tradedto0_.tradeoid in (select orderdto1_.tradeoid from a2 orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')) and tradedto0_.undefine4='1' and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;
+----+--------------------+------------+-------+-----------------+----------------------+---------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+--------------------+------------+-------+-----------------+----------------------+---------+
| 1 | PRIMARY | tradedto0_ | ref | ind_tradestatus | ind_tradestatus | 345 | const,const,const,const | 8962 | Using where; Using filesort |
| 2 | DEPENDENT SUBQUERY | orderdto1_ | index | NULL | ind_a2 | 777 | NULL | 41005 | Using where; Using index |
+----+--------------------+------------+-------+-----------------+----------------------+---------+

发现性能还是上不去,关键在两个表扫描的行数并没有减小(8962*41005),上面添加的索引没有太大的效果,现在查看t表的执行结果:


db@3306 :select orderdto1_.tradeoid from t orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%';
Empty set (0.05 sec)

结果集为空,所以需要将t表的结果集做作为驱动表;
4.通过上面测试验证,普通的mysql子查询写法性能上是很差的,为mysql的子查询天然的弱点,需要将sql进行改写为关联的写法:


select tradedto0_.* from a1 tradedto0_ ,(select orderdto1_.tradeoid from a2 orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')t2 where tradedto0_.tradestatus='1' and (tradedto0_.tradeoid=t2.tradeoid ) and tradedto0_.undefine4='1' and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;

5.查看执行计划:


db@3306 :explain select tradedto0_.* from a1 tradedto0_ ,(select orderdto1_.tradeoid from a2 orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')t2 where tradedto0_.tradestatus='1' and (tradedto0_.tradeoid=t2.tradeoid ) and tradedto0_.undefine4='1' and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;
+----+-------------+------------+-------+---------------+----------------------+---------+------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+------------+-------+---------------+----------------------+---------+------+
| 1 | PRIMARY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | Impossible WHERE noticed after reading const tables |
| 2 | DERIVED | orderdto1_ | index | NULL | ind_a2 | 777 | NULL | 41005 | Using where; Using index |
+----+-------------+------------+-------+---------------+----------------------+---------+------+

6.执行时间:


db@3306 :select tradedto0_.* from a1 tradedto0_ ,(select orderdto1_.tradeoid from a2 orderdto1_ where orderdto1_.proname like '%??%' or orderdto1_.procode like '%??%')t2 where tradedto0_.tradestatus='1' and (tradedto0_.tradeoid=t2.tradeoid ) and tradedto0_.undefine4='1' and tradedto0_.invoicetype='1' and tradedto0_.tradestep='0' and (tradedto0_.orderCompany like '0002%') order by tradedto0_.tradesign ASC, tradedto0_.makertime desc limit 15;
Empty set (0.03 sec)

缩短到了毫秒;



相关阅读 :
浅谈MySQL中的子查询优化技巧
浅谈MySQL中的触发器
详细讲述MySQL中的子查询操作
浅谈MySQL中优化sql语句查询常用的30种方法
浅谈mysql中多表不关联查询的实现方法
在MySQL中使用子查询和标量子查询的基本操作教程
MySQL中列子查询与行子查询操作的学习教程
浅谈Mysql中类似于nvl()函数的ifnull()函数
浅谈MySQL中group_concat()函数的排序方法
几种MySQL中的联接查询操作方法总结
MySQL里面的子查询实例
详解MySQL中的分组查询与连接查询语句
最新网友评论  共有(0)条评论 发布评论 返回顶部

Copyright © 2007-2017 PHPERZ.COM All Rights Reserved   冀ICP备14009818号  版权声明  广告服务