发布于 2015-05-27 05:57:49 | 108 次阅读 | 评论: 0 | 来源: 网友投递

这里有新鲜出炉的Python3 官方中文指南,程序狗速度看过来!

Python编程语言

Python 是一种面向对象、解释型计算机程序设计语言,由Guido van Rossum于1989年底发明,第一个公开发行版发行于1991年。Python语法简洁而清晰,具有丰富和强大的类库。它常被昵称为胶水语言,它能够把用其他语言制作的各种模块(尤其是C/C++)很轻松地联结在一起。


这篇文章主要介绍了详解在Python中处理异常的教程,是Python入门中的基础知识,需要的朋友可以参考下

什么是异常?

异常是一个事件,其中一个程序,破坏程序的指令的正常流的执行过程中而发生的。一般情况下,当一个Python脚本遇到一些情况不能处理,就抛出一个异常。异常是一个Python对象,它表示一个错误。

当Python脚本抛出一个异常,它必须处理异常,否则将立即终止。
处理异常:

如果有可能会引发异常的一些可疑的代码,就可以通过将可疑的代码在一个try块:保卫你的程序。在try块,包括以下情况except:语句,其次是代码,作为优雅的处理问题,尽可能块。
语法

这里是try....except...else 块的简单语法:

try:
  You do your operations here;
  ......................
except ExceptionI:
  If there is ExceptionI, then execute this block.
except ExceptionII:
  If there is ExceptionII, then execute this block.
  ......................
else:
  If there is no exception then execute this block. 

这里有一些关于上述语法要点:

  •     单个try语句可以有多个不同的语句。当try块中包含可能会引发不同类型的异常语句,这是很有用的。
  •     也可以提供一个通用的except子句,它用来处理任何异常。
  •     except子句后,可以包括其他子句。块没有引发异常:在别的块中的代码,如果在try中的代码执行。
  •     在else块是不需要try:块的代码的保护。

例子

这里是简单的例子,这将打开一个文件并写入内容的文件中并移出正常:

#!/usr/bin/python

try:
  fh = open("testfile", "w")
  fh.write("This is my test file for exception handling!!")
except IOError:
  print "Error: can't find file or read data"
else:
  print "Written content in the file successfully"
  fh.close()

这将产生以下结果:

Written content in the file successfully

示例:

这里有一个更简单的例子,它试图打开没有权限并在文件中写入内容,所以它会引发一个异常:

#!/usr/bin/python

try:
  fh = open("testfile", "r")
  fh.write("This is my test file for exception handling!!")
except IOError:
  print "Error: can't find file or read data"
else:
  print "Written content in the file successfully"

这将产生以下结果:

Error: can't find file or read data

在except子句无异常:

还可以使用不同的定义如下无异常的声明:

try:
  You do your operations here;
  ......................
except:
  If there is any exception, then execute this block.
  ......................
else:
  If there is no exception then execute this block. 

try-except 语句捕获所有出现的异常。使用这种try-except 声明不被认为是一个良好的编程习惯,但因为它捕获所有异常,但不会使程序员找出可能出现的问题的根本原因。
在except子句的多个异常:

也可以使用相同的除语句来处理多个异常,如下所示:

try:
  You do your operations here;
  ......................
except(Exception1[, Exception2[,...ExceptionN]]]):
  If there is any exception from the given exception list, 
  then execute this block.
  ......................
else:
  If there is no exception then execute this block. 

try-finally 语句:

可以使用finally:块连同try:块。在try块是否引发异常或没有任何代码 finally块是一个必须执行的块。try-finally语句的语法是这样的:

try:
  You do your operations here;
  ......................
  Due to any exception, this may be skipped.
finally:
  This would always be executed.
  ......................

请注意,可以提供except子句或finally子句,但不能同时使用。不能同时使用else子句与finally子句。
例子:

#!/usr/bin/python

try:
  fh = open("testfile", "w")
  fh.write("This is my test file for exception handling!!")
finally:
  print "Error: can't find file or read data"

如果没有权限,以写入方式打开文件,那么这将产生以下结果:

Error: can't find file or read data

同样的例子可以写入更简洁,如下所示:

#!/usr/bin/python

try:
  fh = open("testfile", "w")
  try:
   fh.write("This is my test file for exception handling!!")
  finally:
   print "Going to close the file"
   fh.close()
except IOError:
  print "Error: can't find file or read data"

当一个异常被抛出在try块中,执行立即传递到finally块。finally块中的所有语句都执行,该异常被再次抛出,并在被处理 except 语句如果出现在一个更高的层在try-except语句。
Exception参数:

异常可以有一个参数,参数是一个值,它给出了关于这个问题的其他信息。参数按异常内容改变。可以通过不同的子句提供一个变量,如下所示捕获异常的参数:

try:
  You do your operations here;
  ......................
except ExceptionType, Argument:
  You can print value of Argument here...

如果正在编写代码来处理一个异常,可以有一个变量按照异常的名称在不同的声明。如果捕捉多个异常,可以有一个变量按照异常的元组。

这个变量将接收主要包含异常原因的异常值。该变量可以在一个元组的形式接收一个或多个值。该元组通常包含错误串,错误码和一个错误的位置。
示例:

下面是一个异常的例子:

#!/usr/bin/python

# Define a function here.
def temp_convert(var):
  try:
   return int(var)
  except ValueError, Argument:
   print "The argument does not contain numbersn", Argument

# Call above function here.
temp_convert("xyz");

这将产生以下结果:

The argument does not contain numbers
invalid literal for int() with base 10: 'xyz'

抛出异常:

可以通过使用raise语句抛出几个方面的异常。一般raise语句的语法。
语法

raise [Exception [, args [, traceback]]]

这里,Exception是异常的类型(例如,NameError)和参数是用于异常的参数值。该参数是可选的;如果未提供,则异常的参数是None。

最后一个参数traceback,也是可选的(并且在实践中很少使用),并且如果存在的话,那么用于异常回溯对象。
例子:

异常可以是一个字符串,一个类或一个对象。大多数Python核心抛出是类,有参数认为是类的实例的异常。定义新的异常是很容易的,可以参考如下:

def functionName( level ):
  if level < 1:
   raise "Invalid level!", level
   # The code below to this would not be executed
   # if we raise the exception

注:为了捕获一个异常,“except”语句必须引用抛出类对象或简单的字符串相同的异常。例如,捕捉到上面的异常,必须写except子句,如下所示:

try:
  Business Logic here...
except "Invalid level!":
  Exception handling here...
else:
  Rest of the code here...

用户定义的异常:

Python中,还可以通过内置的异常标准的派生类来创建自己的异常。

下面是有关RuntimeError一个例子。这里是从RuntimeError子类的类被创建。当需要显示更多的具体信息时,一个异常被捕获,这是很有用的。

在try块中,用户定义的异常引发,并夹在except块。变量e被用来创建类Networkerror的一个实例。

class Networkerror(RuntimeError):
  def __init__(self, arg):
   self.args = arg

所以一旦在上面定义的类,可以按如下方法抛出异常:

try:
  raise Networkerror("Bad hostname")
except Networkerror,e:
  print e.args



最新网友评论  共有(0)条评论 发布评论 返回顶部

Copyright © 2007-2017 PHPERZ.COM All Rights Reserved   冀ICP备14009818号  版权声明  广告服务